1. Forum
  2. UseNet
  3. rec.games.pinball

  • CREATURE FROM THE BLACK LAGOON - GRD SHORT ROW 1

    From Curtis Ague@nspcurtis@gmail.com to rec.games.pinball on Monday, July 17, 2023 13:35:37
    From Newsgroup: rec.games.pinball

    Does anyone know where the ROW 1 is on the circuit board. I am getting an error code GRD SHORT ROW 1 WHT-BRN R-1

    --- Synchronet 3.19a-Win32 NewsLink 1.113
  • From Lloyd Olson@originallloydthegreat@gmail.com to rec.games.pinball on Tuesday, July 18, 2023 10:09:25
    From Newsgroup: rec.games.pinball

    On Monday, July 17, 2023 at 3:35:44 PM UTC-5, Curtis Ague wrote:
    Does anyone know where the ROW 1 is on the circuit board. I am getting an error code GRD SHORT ROW 1 WHT-BRN R-1
    Remove the ROW 1 connector from the CPU and see if error remains or not. If it does your CPU needs some work. That would be the small connectors on the bottom of the CPU, look for the one with a white wire/brown stripe.
    If you remove the connector and the error goes away, then the problem is out in the game on that line with the white wire/brown stripe. Your manual has a switch matrix so it's easy to figure out what switches to check on that row.
    Look them over for anything obvious. Short to wiring, switch lugs bent together or shorting to metal.
    LTG : )
    --- Synchronet 3.19a-Win32 NewsLink 1.113
  • From Riles@steelyballs@gmail.com to rec.games.pinball on Tuesday, July 18, 2023 21:25:50
    From Newsgroup: rec.games.pinball

    On Tuesday, July 18, 2023 at 10:09:32 AM UTC-7, Lloyd Olson wrote:
    On Monday, July 17, 2023 at 3:35:44 PM UTC-5, Curtis Ague wrote:
    Does anyone know where the ROW 1 is on the circuit board. I am getting an error code GRD SHORT ROW 1 WHT-BRN R-1
    Remove the ROW 1 connector from the CPU and see if error remains or not. If it does your CPU needs some work. That would be the small connectors on the bottom of the CPU, look for the one with a white wire/brown stripe.

    If you remove the connector and the error goes away, then the problem is out in the game on that line with the white wire/brown stripe. Your manual has a switch matrix so it's easy to figure out what switches to check on that row.

    Look them over for anything obvious. Short to wiring, switch lugs bent together or shorting to metal.

    LTG : )
    Manual can be downloaded here: https://www.ipdb.org/search.pl?any=cftbl&search=Search+Database&searchtype=quick
    --- Synchronet 3.19a-Win32 NewsLink 1.113
  • From Tony@Tony@TheDeliKing.ca to rec.games.pinball on Sunday, August 06, 2023 16:43:46
    From Newsgroup: rec.games.pinball

    Curtis Ague wrote:
    Does anyone know where the ROW 1 is on the circuit board. I am getting an error code GRD SHORT ROW 1 WHT-BRN R-1



    What the hell has happened to my newsgroup? This is Tommy Tutalidge and
    I'm back.
    --- Synchronet 3.19a-Win32 NewsLink 1.113