• DATA EAST Tales From The Crypt Help !!

    From RIC@PENNY357@aol.com to rec.games.pinball on Wednesday, June 01, 2022 15:35:32
    From Newsgroup: rec.games.pinball

    1994 TFTC bought in 1998. Absolutely NO PROBLEMS except a broken plastic drop target--since fixed. Played machine after about three months of non use. Played fine all day. Turned machine on two weeks later--virtually nothing except G.I. lights. As it stands, the G.I. lights all work. The DMD comes on for about a second, then flashes and goes out. Nothing else except an occasional vibration from the shaker motor. Tried to check fuse voltages but fuses on the PPB-1 board kept blowing after about a minute or less. Fuses F3, F5, F8 and maybe F6 (all Slow Blow) blew during that first minute, some with a bright flash. Any ideas? I'm guessing maybe a problem on the PPB-1 board itself. A bad coil wouldn't blow all those fuses. This is the only Data East game I have and no problems with it previously. If it sounds like the board, any ideas on who could repair such a problem? Any suggestions would be greatly appreciated. I'm lost (easy enough to do.) Thanks, RIC
    --- Synchronet 3.19a-Win32 NewsLink 1.113
  • From John Robertson@spam@flippers.com to rec.games.pinball on Wednesday, June 01, 2022 18:02:49
    From Newsgroup: rec.games.pinball

    On 2022/06/01 3:35 p.m., RIC wrote:
    1994 TFTC bought in 1998. Absolutely NO PROBLEMS except a broken plastic drop target--since fixed. Played machine after about three months of non use. Played fine all day. Turned machine on two weeks later--virtually nothing except G.I. lights. As it stands, the G.I. lights all work. The DMD comes on for about a second, then flashes and goes out. Nothing else except an occasional vibration from the shaker motor. Tried to check fuse voltages but fuses on the PPB-1 board kept blowing after about a minute or less. Fuses F3, F5, F8 and maybe F6 (all Slow Blow) blew during that first minute, some with a bright flash. Any ideas? I'm guessing maybe a problem on the PPB-1 board itself. A bad coil wouldn't blow all those fuses. This is the only Data East game I have and no problems with it previously. If it sounds like the board, any ideas on who could repair such a problem? Any suggestions would be greatly appreciated. I'm lost (easy enough to do.) Thanks, RIC

    Remove the solenoid and flash lamp fuse(s) when testing pinball games
    that aren't working properly.

    Now, check for good 5VDC in the MPU board. That must be there for
    anything else to work.

    If good then let us know.

    I always recommend that the PPP board be removed and the backside solder connections for all the Molex pin connectors be resoldered to deal with hairline solder cracks.

    Gotta go now, but perhaps that will get you started...

    John :-#)#
    --
    (Please post followups or tech inquiries to the USENET newsgroup)
    John's Jukes Ltd.
    MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
    (604)872-5757 (Pinballs, Jukes, Video Games)
    www.flippers.com
    "Old pinballers never die, they just flip out."
    --- Synchronet 3.19a-Win32 NewsLink 1.113
  • From John Robertson@spam@flippers.com to rec.games.pinball on Wednesday, June 01, 2022 18:03:23
    From Newsgroup: rec.games.pinball

    On 2022/06/01 6:02 p.m., John Robertson wrote:
    On 2022/06/01 3:35 p.m., RIC wrote:
    1994 TFTC bought in 1998.  Absolutely NO PROBLEMS except a broken
    plastic drop target--since fixed.  Played machine after about three
    months of non use.  Played fine all day.  Turned machine on two weeks
    later--virtually nothing except G.I. lights.  As it stands, the G.I.
    lights all work.  The DMD comes on for about a second, then flashes
    and goes out.  Nothing else except an occasional vibration from the
    shaker motor.  Tried to check fuse voltages but fuses on the PPB-1
    board kept blowing after about a minute or less.  Fuses F3, F5, F8 and
    maybe F6 (all Slow Blow) blew during that first minute, some with a
    bright flash.  Any ideas?  I'm guessing maybe a problem on the PPB-1
    board itself.  A bad coil wouldn't blow all those fuses.  This is the
    only Data East game I have and no problems with it previously.  If it
    sounds like the board, any ideas on who could repair such a problem?
    Any suggestions would be greatly appreciated.  I'm lost  (easy enough
    to do.)  Thanks, RIC

    Remove the solenoid and flash lamp fuse(s) when testing pinball games
    that aren't working properly.

    Now, check for good 5VDC in the MPU board. That must be there for
    anything else to work.

    If good then let us know.

    I always recommend that the PPP board be removed and the backside solder connections for all the Molex pin connectors be resoldered to deal with hairline solder cracks.

    Gotta go now, but perhaps that will get you started...

    John :-#)#


    PPB board, not PPP, typo...

    John :-#)#
    --
    (Please post followups or tech inquiries to the USENET newsgroup)
    John's Jukes Ltd.
    MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
    (604)872-5757 (Pinballs, Jukes, Video Games)
    www.flippers.com
    "Old pinballers never die, they just flip out."
    --- Synchronet 3.19a-Win32 NewsLink 1.113