• Spinner Rubber replacement

    From Steven Campbell@stevencam62@gmail.com to rec.games.pinball on Monday, November 08, 2021 20:34:20
    From Newsgroup: rec.games.pinball

    I have a couple of Williams SS games that have spinners. on them.. The outside frame gate was all bent up so I decided to pull them off, put them in the vibrator or whatever it's called, and then carefully bring them back to the design they are suppose to be.
    They have vertical legs and on the legs are round rubbers that are pretty tall. My problem is I can NOT figure out how to get them off. The long screw they are on is something I cant remember if it comes apart.
    The bottom is a normal looking screw that goes down into the playfield then there is a round flange that is a bit bigger, then the round rubber then on to[p of that is another round oversized flange.
    So, any help would be appreciated very much!!!!
    thanks
    --- Synchronet 3.19a-Win32 NewsLink 1.113
  • From John Robertson@spam@flippers.com to rec.games.pinball on Monday, November 08, 2021 22:11:00
    From Newsgroup: rec.games.pinball

    On 2021/11/08 8:34 p.m., Steven Campbell wrote:
    I have a couple of Williams SS games that have spinners. on them.. The outside frame gate was all bent up so I decided to pull them off, put them in the vibrator or whatever it's called, and then carefully bring them back to the design they are suppose to be.

    They have vertical legs and on the legs are round rubbers that are pretty tall. My problem is I can NOT figure out how to get them off. The long screw they are on is something I cant remember if it comes apart.

    The bottom is a normal looking screw that goes down into the playfield then there is a round flange that is a bit bigger, then the round rubber then on to[p of that is another round oversized flange.

    So, any help would be appreciated very much!!!!

    thanks


    Those rubber sleeves should just pull off straight up when the screw on
    the top is removed. Might be a bit tight due to age, but that was the
    intent - slide up and off.

    John :-#)#
    --
    (Please post followups or tech inquiries to the USENET newsgroup)
    John's Jukes Ltd.
    MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
    (604)872-5757 (Pinballs, Jukes, Video Games)
    www.flippers.com
    "Old pinballers never die, they just flip out."
    --- Synchronet 3.19a-Win32 NewsLink 1.113