Looking for the oblong yellow target face for TZ slot target. PBR doesnt carry them. Seems like a shame to trash an entire switch assembly over such a small piece of plastic and a rivet.
On Monday, January 11, 2021 at 10:03:17 PM UTC-5, Riles wrote:
Looking for the oblong yellow target face for TZ slot target. PBR doesnt carry them. Seems like a shame to trash an entire switch assembly over such a small piece of plastic and a rivet.Worse case is you buy a round one and grind it down (carefully) to the oblong shape, nobody will be able to tell the difference.
John
On Tuesday, January 12, 2021 at 5:14:50 AM UTC-5, John Dayhuff wrote:
On Monday, January 11, 2021 at 10:03:17 PM UTC-5, Riles wrote:
Looking for the oblong yellow target face for TZ slot target. PBR doesnt carry them. Seems like a shame to trash an entire switch assembly over such a small piece of plastic and a rivet.Worse case is you buy a round one and grind it down (carefully) to the oblong shape, nobody will be able to tell the difference.
JohnDid you look at Marco? 03-8225-6 shows in stock.
Joseph "Tony" Dziedzic
On Tuesday, January 12, 2021 at 4:40:26 AM UTC-8, Joseph 'Tony' Dziedzic wrote:Download the "parts list" for Twilight Zone from www.ipdb.org, and search for that part number; within that region of the file you'll see the size rivet Williams originally used.
On Tuesday, January 12, 2021 at 5:14:50 AM UTC-5, John Dayhuff wrote:
On Monday, January 11, 2021 at 10:03:17 PM UTC-5, Riles wrote:
Looking for the oblong yellow target face for TZ slot target. PBR doesnt carry them. Seems like a shame to trash an entire switch assembly over such a small piece of plastic and a rivet.Worse case is you buy a round one and grind it down (carefully) to the oblong shape, nobody will be able to tell the difference.
JohnDid you look at Marco? 03-8225-6 shows in stock.
Joseph "Tony" DziedzicThanks Tony! I havent ordered from Marco in ages. I know I need a 1/8in dia rivet, not sure what length to get.
On Tuesday, January 12, 2021 at 7:19:23 PM UTC-5, Riles wrote:This is super helpful information, for this situation and for the future. Thanks a lot Tony!
On Tuesday, January 12, 2021 at 4:40:26 AM UTC-8, Joseph 'Tony' Dziedzic wrote:
On Tuesday, January 12, 2021 at 5:14:50 AM UTC-5, John Dayhuff wrote:
On Monday, January 11, 2021 at 10:03:17 PM UTC-5, Riles wrote:
Looking for the oblong yellow target face for TZ slot target. PBR doesnt carry them. Seems like a shame to trash an entire switch assembly over such a small piece of plastic and a rivet.Worse case is you buy a round one and grind it down (carefully) to the oblong shape, nobody will be able to tell the difference.
JohnDid you look at Marco? 03-8225-6 shows in stock.
Download the "parts list" for Twilight Zone from www.ipdb.org, and search for that part number; within that region of the file you'll see the size rivet Williams originally used.Joseph "Tony" DziedzicThanks Tony! I havent ordered from Marco in ages. I know I need a 1/8in dia rivet, not sure what length to get.
685: -----6 03-8225-6 tgt oblong stat-op yellow 1
686: -----6 07-6697-4 rivet .125X.187x.218 zinc 1
687: -----6 4700-00003-00 fw .125X.281X.032 1
(The "6" here is the "level" within an assembly; for example, the "A-15658-6 stat tgt-frt mtg95 oblg-op yel" is level 3, and the parts that go into that assembly are one level greater, with each sub-assembly increasing the level.) The rivet is 0.125 inches in diameter, 0.187 inches long, with a head diameter of 0.218 inches; a flat washer ("fw") backs up the rivet.
If you can't find a particular assembly (for example, the entire target assembly) you can use the parts list info to find a sub-assembly that might be available.
Sysop: | Gary Ailes |
---|---|
Location: | Pittsburgh, PA |
Users: | 106 |
Nodes: | 5 (0 / 5) |
Uptime: | 87:35:04 |
Calls: | 588 |
Files: | 2,171 |
Messages: | 64,792 |