Re: Updated fidohub image
By: Al to deon on Sat Apr 24 2021 05:50 pm

I've also included in /usr/local/bin my mail-in.sh (to toss incoming mail after receipt), as well as my filters.

Do you happen to have a filter or perl module that will check the nodelist and bounce undeliverable netmail back to the sender?

Yup, that's what one of my filter module does.

https://dev.leenooks.net/bbs/fidohub/-/blob/master/tools/filters/filter-route.pl

Its in use on Hub 3.

...ëîåï

... Moderation is a fatal thing - nothing succeeds like excess.
--- SBBSecho 3.14-Linux
* Origin: I'm playing with ANSI+videotex - wanna play too? (21:2/116)

Re: Re: Updated fidohub image
By: Avon to deon on Sun Apr 25 2021 01:29 pm

I noticed the chatter in HPT echo in recent days and about PING and think it would be good to offer of in all fsxNet HUBs.

Yes, it would be good for the hubs to support TRACE (which I havent fully tested yet).

Any synchronet BBS has "ping" built in with no setup required :)

...ëîåï

... Ah! Mozart. He was happily married - but his wife wasn't.
--- SBBSecho 3.14-Linux
* Origin: I'm playing with ANSI+videotex - wanna play too? (21:2/116)

On 25 Apr 2021 at 02:20p, deon pondered and said...

I noticed the chatter in HPT echo in recent days and about PING and t it would be good to offer of in all fsxNet HUBs.

Yes, it would be good for the hubs to support TRACE (which I havent fully tested yet).

I have just updated my copy of HPT, next step is to read the docs and figure out how to get PING etc working :)

--- Mystic BBS v1.12 A46 2020/08/26 (Windows/32)
* Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (21:1/101)

On 25 Apr 2021, 09:58a, deon said the following...

I've updated my fidohub image which has binkd 112 and udpates to hpt as
of 2 day s ago.

I've also included in /usr/local/bin my mail-in.sh (to toss incoming
mail after receipt), as well as my filters.

Thank you. I have tomorrow off, so I'll try to update the system here. :)


---

Black Panther(RCS)
aka Dan Richter
Castle Rock BBS
telnet://bbs.castlerockbbs.com
http://www.castlerockbbs.com
http://github.com/DRPanther
The sparrows are flying again...

--- Mystic BBS v1.12 A47 2021/04/20 (Linux/64)
* Origin: Castle Rock BBS - bbs.castlerockbbs.com - (21:1/186)

Hey BP,

I've updated my fidohub image which has binkd 112 and udpates to hpt as of 2 days ago.

I've also included in /usr/local/bin my mail-in.sh (to toss incoming mail after receipt), as well as my filters.

If you want to use filter.pl, you'd probably need to move it to persistent storage and call it from there (so it persists after container reloads) because it has some local configuration items, but the included modules (the test bot, ping/trace, etc) should be OK to reference the ones in the image (unless you customise them as well).

If there are fixes/updates, let me know and I'll incorporate it into a new build.

...ëîåï

... You don't have to think too hard when you talk to teachers.
--- SBBSecho 3.14-Linux
* Origin: I'm playing with ANSI+videotex - wanna play too? (21:2/116)

Re: Updated fidohub image
By: deon to Black Panther on Sun Apr 25 2021 09:58 am

I've also included in /usr/local/bin my mail-in.sh (to toss incoming mail after receipt), as well as my filters.

Do you happen to have a filter or perl module that will check the nodelist and bounce undeliverable netmail back to the sender?

Ttyl :-),
Al

... Software means never having to say you're finished.
--- SBBSecho 3.14-Linux
* Origin: The Rusty MailBox - Penticton, BC Canada (21:4/106.1)

On 25 Apr 2021 at 09:58a, deon pondered and said...

I've updated my fidohub image which has binkd 112 and udpates to hpt as
of 2 days ago.

I've also included in /usr/local/bin my mail-in.sh (to toss incoming
mail after receipt), as well as my filters.

If you want to use filter.pl, you'd probably need to move it to
persistent storage and call it from there (so it persists after
container reloads) because it has some local configuration items, but

the included modules (the test bot, ping/trace, etc) should be OK to reference the ones in the image (unless you customise them as well).

although I am not using your docker image I'd be keen (if poss) to implement the filters etc. also to take advantage of the PING function etc. I'd also
like to try and post the daily status updates that 3/100 does to show mail
held for nodes.

Given I am working on getting the TZ kludge working for my bot posts I'd
better walk first before I run.

I noticed the chatter in HPT echo in recent days and about PING and think it would be good to offer of in all fsxNet HUBs.

--- Mystic BBS v1.12 A46 2020/08/26 (Windows/32)
* Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (21:1/101)

On 24 Apr 2021 at 05:50p, Al pondered and said...

Do you happen to have a filter or perl module that will check the
nodelist and bounce undeliverable netmail back to the sender?

golly that sounds good to.

--- Mystic BBS v1.12 A46 2020/08/26 (Windows/32)
* Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (21:1/101)

Re: Re: Updated fidohub image
By: Avon to Al on Sun Apr 25 2021 01:29 pm

Do you happen to have a filter or perl module that will check the
nodelist and bounce undeliverable netmail back to the sender?

golly that sounds good to.

Yes, these undeliverables just clog up the works.

The husky crew must have done this already I think, but I'm not seeing it.

Ttyl :-),
Al

... Unable to load REALITY.SYS Invalid Parameter: /UTOPIA
--- SBBSecho 3.14-Linux
* Origin: The Rusty MailBox - Penticton, BC Canada (21:4/106.1)

On 24 Apr 2021 at 06:58p, Al pondered and said...

Yes, these undeliverables just clog up the works.

The husky crew must have done this already I think, but I'm not seeing
it.

I saw your chat about PING in that echo. Would like to add this to 1/100 and others...

--- Mystic BBS v1.12 A46 2020/08/26 (Windows/32)
* Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (21:1/101)

Re: Re: Updated fidohub image
By: Avon to deon on Sun Apr 25 2021 01:29 pm

although I am not using your docker image I'd be keen (if poss) to implement the filters etc. also to take advantage of the PING function etc. I'd also like to try and post the daily status updates that 3/100 does to show mail held for nodes.

I just started using pingpong.pm for PING/TRACE support. It can be found in the hpt/misc directory. Stas just updated it a week ago so grab some fresh sources if you want to look at it.

Aside from the ping and trace functions pingers can also choose from your trusted links which way to route the reply.

Ttyl :-),
Al

... Brain: the apparatus with which we think we think
--- SBBSecho 3.14-Linux
* Origin: The Rusty MailBox - Penticton, BC Canada (21:4/106.1)

Re: Re: Updated fidohub image
By: Avon to Al on Sun Apr 25 2021 02:03 pm

I saw your chat about PING in that echo. Would like to add this to 1/100 and others...

Pingpong.pm is self documenting. Do perldoc pingpong.pm and if you have questions.. :)

Ttyl :-),
Al

... Freedom of the press is limited to those who have one.
--- SBBSecho 3.14-Linux
* Origin: The Rusty MailBox - Penticton, BC Canada (21:4/106.1)

On 24 Apr 2021 at 07:06p, Al pondered and said...

I just started using pingpong.pm for PING/TRACE support. It can be found in the hpt/misc directory. Stas just updated it a week ago so grab some fresh sources if you want to look at it.

first thing is for me to update then :) will work on this shortly.

--- Mystic BBS v1.12 A46 2020/08/26 (Windows/32)
* Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (21:1/101)