On 25 Jan 2021 at 10:47p, Nuke pondered and said...

Under events editor for echomail, do those need to be modified prior to activating? With Avon's advice on mailout.ini / mailin.ini - I wasn't sure if the original commands using "import.ini" apply?
I did try to modify to what I thought it should be and activing these events appear to lock up MIS (it shows "Starting Events" but never seems to finish.

A lot of the events in the stock install refer to files not created.

I'd start with two semaphore events to listen for incoming and outgoing echomail/netmail.

I'd also have an interval event set to poll your hub(s) and a nightly maintenance event to run an .ini that calls the maintenance you want done.

--- Mystic BBS v1.12 A46 2020/08/26 (Linux/64)
* Origin: Westwood BBS II (21:1/999)

You will want to ensure your shell commands are set for linux pathing so something like

./mutil mailin.ini (assuming you have an ini set up to process echomail and files etc. called mailin :)

--- Mystic BBS v1.12 A46 2020/08/26 (Windows/32)
* Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (21:1/101)

A lot of the events in the stock install refer to files not created.

I'd start with two semaphore events to listen for incoming and outgoing echomail/netmail.

I'd also have an interval event set to poll your hub(s) and a nightly maintenance event to run an .ini that calls the maintenance you want
done.

I think this is an area that trips a lot of people up (me included). As this is of concern for fsxNet sysops running echomail properly w/Mystic, wonder if we could create a documentation page on the fsxNet wiki showing recommended echomail setups? I've actually scrubbed your videos multiple times looking at events.At one point, I gave up on Mystic events and switched to cron jobs, not realizing you had to restart the mis server for them to take effect... Also, there's the difference between Windows and Linux events, no more fidpoll, etc.

|04þ |12Alpha |04þ
|03Corporation X BBS|08........|11corpxbbs.com:2323|08...........|07Mystic |03The Drunken Gamer BBS|08....|11thedrunkengamer.com:8888|08....|07Talisman

--- Mystic BBS v1.12 A47 2021/01/26 (Linux/64)
* Origin: Corporation X BBS (21:4/158)

On 27 Jan 2021, Alpha said the following...

I think this is an area that trips a lot of people up (me included). As this is of concern for fsxNet sysops running echomail properly w/Mystic, wonder if we could create a documentation page on the fsxNet wiki

Agreed. I just had to help someone with this on Reddit /r/bbs with the same issues, and actually sent them the import, export, and maintenance scripts
that I use.

It's easily the hardest part about the initial setup.


- Andre

--- Mystic BBS v1.12 A45 2020/02/18 (Raspberry Pi/32)
* Origin: Runaan BBS (21:3/117)

On 27 Jan 2021 at 03:16p, Alpha pondered and said...

I think this is an area that trips a lot of people up (me included). As this is of concern for fsxNet sysops running echomail properly w/Mystic, wonder if we could create a documentation page on the fsxNet wiki
showing recommended echomail setups? I've actually scrubbed your videos multiple times looking at events.At one point, I gave up on Mystic
events and switched to cron jobs, not realizing you had to restart the
mis server for them to take effect... Also, there's the difference
between Windows and Linux events, no more fidpoll, etc.

I agree... I'm working on a Fido HUB conversion to HPT right now but more
than happy to open up editor access to the fsx wiki to anyone who would like
to work on it etc.

--- Mystic BBS v1.12 A46 2020/08/26 (Windows/32)
* Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (21:1/101)

I just went through this as well, and was only able to figure everything out from Paul's YouTube videos. I'm running Linux, so naturally I followed the Linux/Raspberry Pi videos to setup my mailin.ini, mailout.ini and maint.ini,
as well as the fidopoll, but had to watch through one of the Windows videos
to figure out events.

I didn't catch the bit about having to restart the mis server to get them running though, which is likely why I couldn't get them working and changed them all to scripts scheduled in cron. (Along with a @reboot script to start mis and mrc at boot).

I'm sure there's tons I'm missing (I still don't have filebases beyond NODE
and INFO), so I'd be very happy to beta test any docs, procedures etc, should that be useful to anyone :)

Thanks,
Jay

--- Mystic BBS v1.12 A46 2020/08/26 (Linux/64)
* Origin: Technically BBS (21:1/168)

On 27 Jan 2021, jayb said the following...

mailout.ini and maint.ini, as well as the fidopoll, but had to watch through one of the Windows videos to figure out events.

Yeah, that was a gotcha that I had to mention to the person I was helping.
The really old Windows video looks like it's redundant to the newer linux video, but without it I never would have figured out the event config screen.


- Andre

--- Mystic BBS v1.12 A46 2020/08/26 (Raspberry Pi/32)
* Origin: Runaan BBS (21:3/117)

All,
I have so many questions on Mystic, but I will start with the big one first:

Under events editor for echomail, do those need to be modified prior to activating? With Avon's advice on mailout.ini / mailin.ini - I wasn't sure
if the original commands using "import.ini" apply?

I did try to modify to what I thought it should be and activing these events appear to lock up MIS (it shows "Starting Events" but never seems to finish.

Thanks,
Nuke - Westwood BBS II

Nuke
Sysop - Westwood BBS
King George, VA USA
"Don't you hate it when someone answers their own questions? I do."

--- Mystic BBS v1.12 A46 2020/08/26 (Linux/64)
* Origin: Westwood BBS II (21:1/999)