It doesn't seem like you sent a proper netmail. This ended up in a
message base. I'll see about sending you one from my board and you can
try to reply to that.
... I think I am, therefore, I am... I think.
--- Mystic BBS v1.12 A47 2021/12/24 (Linux/64)
* Origin: RVs and RPGs BBS (21:3/170)
ogg wrote to 21:2/100 <=-
Hi Todd!
I've sent a few netmails in the past month with no response to
other boards. I'm beginning to think it may be something on my
end.
Could you be kind enough and just reply to this to let me know if
you got it? That would rule out some things on my end.
By the way, everything else seems to be working great on this end
with the polling, etc.
ogg wrote to 21:2/100 <=-
Hi Todd!
I've sent a few netmails in the past month with no response to
other boards. I'm beginning to think it may be something on my
end.
Could you be kind enough and just reply to this to let me know if
you got it? That would rule out some things on my end.
By the way, everything else seems to be working great on this end with the polling, etc.
This appeared in the (public) echomail area, not a (private) netmail, just FYI...
... Gone crazy, be back later, please leave message.
=== MultiMail/Linux v0.52
--- SBBSecho 3.15-Linux
* Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (21:2/138)
I've sent a few netmails in the past month with no response to other boards. I'm beginning to think it may be something on my
end.
Re: testing netmail
By: ogg to 21:2/100 on Wed Jun 29 2022 11:31 am
I've sent a few netmails in the past month with no response to other bo
I'm beginning to think it may be something on my
end.
If you want to test netmail is working, then you can send a ping to my
BBS ping@21:2/116 or Hub 3 ping@21:3/100 and a bot will respond.
If you dont get a response, I can check if I received it and that might help track down where the issue might be.
...лоеп
--- SBBSecho 3.15-Linux
* Origin: I'm playing with ANSI+videotex - wanna play too? (21:2/116)
On Wed Jun 29 11:31:00 2022, ogg wrote to 21:2/100 <=-
Hi Todd!
I've sent a few netmails in the past month with no response to other boards.
I'm beginning to think it may be something on my end.
Could you be kind enough and just reply to this to let me know if you got it?
That would rule out some things on my end.
By the way, everything else seems to be working great on this end with the polling, etc.
Scott
Sysop, Altair IV BBS
Lufkin, TX
fsxnet: 21:2/147
--- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)
* Origin: Altair IV BBS (21:2/147)
ю Synchronet ю fsxNet FTN<>QWK Gateway
Do you have a seperate message area setup for netmail? I think you need one for each network you are a part of. In the message board setting for that area make sure you have TYPE set aws Netmail, and the PRIVATE MSG switch set to yes.That appears to be my problem. I've corrected it!
-DallasThat's the first thing I did! Avon comes through again!
p.s. Have you watched the video on youtube about how to setup netmail on Mystic?
--- Mystic BBS v1.12 A47 2021/09/29 (Windows/64)
* Origin: Legends of Yesteryear (furmenservices.net:23322) (21:4/102)
Do you have a seperate message area setup for netmail? I think you need one for each network you are a part of.
On 29 Jun 2022, Geri Atricks said the following...
Do you have a seperate message area setup for netmail? I think you ne one for each network you are a part of.
For the record, with Mystic you can use one netmail area for all
networks. Just as well, you can have a separate one for each network if you want to.
Regards,
Nick
--- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)
* Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (21:1/200)
I only had one area for netmail. I changed it to two in the hopes that was the issue. If it's not, I'll be at it again!
--- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)
On 30 Jun 2022, ogg said the following...
I only had one area for netmail. I changed it to two in the hopes t was the issue. If it's not, I'll be at it again!
--- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)
You're running the latest version, so there's no issue with one netmail area whatsoever. Since it's not letting me copy/paste, I can try to give you a short version of my netmail area's config:
Name: Netmail
Base Type: Netmail
Newsgroup: Netmail
QWK Name: NETMAIL
Echo Tag: NETMAIL
FIle Name: netmail
Path: /home/user/mystic/msgs
List ACS: s20(g2|g3|g4|g5|g6)
Read ACS: s20(g2|g3|g4|g5|g6)
Post ACS: s20(g2|g3|g4|g5|g6)
Sysop ACS: s255(g2|g3|g4|g5|g6)
Net Address: 0:0/0 (Local Address)
Export To: 3 node(s)
That should get you started. Take note on the last one above, you're exporting to every uplink's individual address for each network with AKA matching. And list, read, post, and sysop ACS should include every group that is an echomail network that includes a netmail area (g1 here is my Local areas, so not needed).
Hope that helps!
Regards,
Nick
--- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)
* Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (21:1/200)
If I had to guess one of those is set right for your base, because when you post to that message base, after you enter a To: it should ask you
for the node adresss.
Actually I just thought about it, since we did exchnage netmail when I sent you one. You are posting to Netmail when you try to send one out right? Because you can't send netmail to/from an echomail group only the netmail group.
| Sysop: | Gary Ailes |
|---|---|
| Location: | Pittsburgh, PA |
| Users: | 132 |
| Nodes: | 5 (0 / 5) |
| Uptime: | 109:06:14 |
| Calls: | 733 |
| Files: | 2,171 |
| Messages: | 81,483 |